Direct answer: plan a B02 cassette awning around the terrace activity and service route before discussing coverage. Confirm the usable facade, opening width, projection, mounting condition, table layout and the moments when staff need the space clear.
Define the terrace as a working zone
A wide terrace is not an empty rectangle. It has guest tables, chair pull-out space, a staff route, doors, planters, heaters, lighting and a boundary that may need to remain open. Draw the seating grid and the service path first. Mark the tables that must stay usable during the sunniest period and the route that staff cannot narrow.
Photograph the terrace from the guest seat and from the service door. Note whether glare reaches the table from above, from the open edge or from reflected paving. The B02 overhead direction can then be reviewed for the part of the terrace it is actually meant to support.
Confirm the facade and opening inputs
Record the continuous wall or beam line, corners, doors, windows, gutters, downpipes, signs and any change in facade material. Measure the usable width rather than the full building elevation. Measure the target projection to the occupied tables and the clear zone beyond them. Mark any point where a front edge, arm or cassette could interfere with a door, a serving hatch or a route.
If the terrace spans more than one facade condition, separate the plan into review zones. A single “wide terrace” request can hide different supports and different operating needs. Give each zone its own width, projection, height and fixing note.
Protect service flow in both shade states
Walk the route with a chair pulled out and with a staff member carrying a tray or clearing a table. Show the minimum passage in the plan. Check it with the awning extended and retracted. The shade should support the guest zone without turning the front edge, controls or maintenance access into a new obstacle.
Also note the time window for setup, service and closing. If the awning needs to change while guests are present, the operating location and control routine should be part of the B02 discussion. A cover that looks right in an empty photograph may still be impractical during a busy service.
Package the terrace brief
Use a wall elevation, a table-and-route plan, time-stamped glare photographs and a short operating schedule. Add the desired fabric or frame context after the physical constraints. If the facade cannot provide a suitable fixing line, record that as a dependency rather than asking the cassette awning to solve it by assumption.
B02 terrace planning FAQ
Is the B02 direction only for restaurants?
No. It can be reviewed for broad outdoor seating where the facade, projection and operating routine support the direction. Hospitality service flow is one example of the planning problem.
Should I measure the full terrace width?
Measure the usable width by zone and record every interruption. The full elevation is context, not automatically the awning width.
What should a first request include?
Include facade photos, zone widths, target projections, table layout, clear routes, the difficult-hour photos and the operating schedule.
Product paths for B02 terrace shade
Start with the published B02 Series collection and review the active B02 heavy-duty motorized cassette awning against the terrace inputs. Use the restaurant outdoor shade collection when guest seating and service circulation are central to the brief. The measurement guide helps organize the wall, opening and route evidence before a configuration review.
Request a B02 terrace review
Send one evidence pack per facade zone. State which tables, routes and service moments must remain usable. That makes the B02 discussion about a workable terrace rather than a catalogue width.
